domingo, 23 de octubre de 2011

I'm back

Sorry the long delay, but I have a good news: A new release of NeoGeo emulators AES4ALL and NEO4ALL for Dreamcast and Dingoo (legacy Dingux).

Now, AES4ALL has SD-Card support (yes, MMU using SD instead CD is more fast, so more playable for large NeoGeo roms) and fixes Yamaha timmings:




NEO4ALL can load ISOs from SD-Card too but there are not CDDA tracks for now:




About Dingoo, runs same speed using a bit of overclock.

MORE INFO AND DOWNLOADS AT NEO4ALL SITE

33 comentarios:

  1. muchas gracias chui, gente como uds genera admiracion es genial que estes siempre ahi y no importa si desapareces un tiempo la gente siempre esta esperandote sabiando que cuando apareces siempre lo haces de manera magistral! felicidades por estas maravillas y gracias!

    ¿en neo4all aumento la lista de compatibilidad y funcionan juegos algunos juegos que antes no funcionaban verdad?

    ese metal slug anda de maravilla seguramente el 2 anda igual de bien o mejor, y ¿que me dices de los snk vs capcom chaos?
    bye y gracias de nuevo!

    ResponderEliminar
  2. Really I am not test the compatibility in depth because I haven't all games and I will need more spare time.

    About 'Capcom vs SNK Chaos' and other very large ROMS, it is more playable only if you have a SD-Card because swapping memory it is more fast.

    ResponderEliminar
  3. Thank you very very much, Chui. Good job and go on !!

    Muchisimas gracias, Chui. Enhorabuena por tu trabajo y ! Sigue así ! ;)

    ResponderEliminar
  4. `` Chui por kof 97-aes y otros juegos de prueba en la tarjeta SD
    Dreamcast no tuvo el resultado esperado de jugar
    por SD "
    ¿Cuáles son estos archivos prf?

    ResponderEliminar
  5. Este comentario ha sido eliminado por el autor.

    ResponderEliminar
  6. Por ejemplo kof94-AES se ha escrito en el videojuego "fue" muy bien en la SD.
    Pero en mi KoF94-AES fue como en CD.

    ResponderEliminar
  7. Neo-Geo CD: el rescate de los juegos están en la tarjeta de memoria permanente

    ResponderEliminar
  8. Sandro-> You must convert NeoGeo roms using convert tool included. Romset is the same that GnGeo emulator.

    This tool convert GnGeo Zipped ROMS to AES/PRF files. PRF is created only when convert tool has prefetch info about that game and AES4ALL uses it for fast loading and swapping memory.

    ResponderEliminar
  9. Good to see you are back! What is next to wait from you?

    ResponderEliminar
  10. I am working on PCSX4ALL for WIZ/CAANOO and SNES4ALL for Dreamcast.

    Right now, I am trying to paint SNES tiles using OpenGL but it has some errors yet.

    ResponderEliminar
  11. Chui, I convert the roms of MAME for AES, I see no improvement in emulation of the NEO-GEO_aes the SD card!

    ResponderEliminar
  12. Depends of game, I suppose. Now games like KOF94 runs fine (see video) using SD card and it was unplayable using CD-ROM.

    But very large games like SVC-Chaos is not enough for being playable.

    ResponderEliminar
  13. Thank you! The emulator is very impressive, the NeoGeo AES.
    They have a new forecast SNES4ALL?

    ResponderEliminar
  14. Grandisimo trabajo el de Chui. el unico fallo es que he probado varios juegos del NEO4ALL rc4 y el sonido de cd audio desaparece en todos ellos cuando llevo un rato jugando, tengo que reiniciar la consola para que se vuelva a oir... A lo mejor es problema de mi consola.

    ResponderEliminar
  15. Sandro-> I am working on it yet. Now draws SNES tiles using Dreamcast PVR textures, but it has some glitches and it has not support for transparencies and mode7/mode5.
    It is around 33% more faster but need more work. Also I would like use MMU pages for direct memory map for next release.

    Davix123-> I don't see that problem but I've tested NEOGEO/CD using CD-ROM a bit in this release. Older releases have this problem or only this?

    ResponderEliminar
  16. Con versiones antiguas tambien me pasa.
    Un saludo.

    ResponderEliminar
  17. I will try it in depth but I never see it.

    ResponderEliminar
  18. chui no entiendo como puedo convertir roms de zip a .aes sin el archivo .pre por ejemplo world heroes 2 si me pudieses ayudar te lo agradeceria

    ResponderEliminar
  19. The .PRE files must be in the 'prefetch' subdirectory (included in convertneo tool). It's used for creating .PRF files and can to fast load AES files.

    Anyway I think that converneo works without .PRE files but I recommend you to use it.

    ResponderEliminar
  20. no me funciona el convert neo, con ese rom, me pide el archivo wh2.pre

    ResponderEliminar
  21. I can't get the prf files. I have a folder named prefetch files in there, a BIOS folder, and the tool converts them to AES just fine but why am I not getting the prf files? I even added the pre files to the main directory and still no luck.

    ResponderEliminar
    Respuestas
    1. Prefetch only works when there are a .PRE file (real prefetch) in prefetch directory. But I have prefetched only 23 games. See .PRE files at prefetch diretory.

      Eliminar
  22. Habrá un nuevo emulador NeoGeo_aes en un futuro próximo?

    ResponderEliminar
    Respuestas
    1. We will release a GENS4ALL version at near future (RetroMadrid 2012) and after, I want to continue with SNES4ALL, so it will not be a new release of NEO4ALL/AES4ALL at near future.

      Anyway, I think that NEO4ALL and AES4ALL is in a mature stage, only it is needed minor changes/features compared to SNES4ALL.

      Eliminar
  23. When you go out the pcx4all? Have for Dreamcast too!

    ResponderEliminar
  24. PCX4ALL is a dead old project, however PCSX4ALL still alive and I hope have a first release for Dreamcast this year.

    ResponderEliminar
  25. TUTORIAL Creating CD SELFBOOT C / NEO4ALL + GAME + CDDA


    Download the file HERE Unzip UTIL items util.exe pack p / (c: \) this is done extract the iso + mp3 c / o
    winrar extract the contents of the iso w / Data folder (c: \ data \) copy
    the files from the NEO4ALL RC2 (c: \ NEO4ALL RC2 \) p / a data folder (c: \ data \). done this
    Criar_Imagem.bat run the file (c: \ Criar_Imagem.bat) p / data.iso create the c: \
    (data.iso)
    ------
    Copy the iso date (c: \ data.iso) w / a folder (c: \ 1 \).
    Copy all mp3 game NeoGeoCD p / mp3_to_wav folder (C: \ mp3_to_wav \) and
    we rename the tracks following the example:
    Last Blade - Track 02.mp3 Track02.mp3 will be, do it w / all mp3.
    Done it open w / Notepad file (Mp3 To Wav.bat) and
    Edit the lines following the example already included until some c / n º of the tracks
    mp3 that has the game that you are using, in my case the game "The Last Blade" that
    has 41 tracks 02a41 I added other lines w / conversion.
    After editing save the file and run it w / start the conversion of p mp3 / wav.
    Now copy all the songs (wav) w / a folder (c: \ 1 \) and run the
    segacuemaker.exe and name w / a *. cue m1
    Once that's done run the Criar_Imagem.bat (c: \ 1 \ Criar_Imagem.bat)
    expects to complete the conversion and you will see the file image.cdi folder (c: \ 1 \ image.cdi)
    There, they saw how easy it is. Now just write c / o Alcohol 120%
    mode General Protected CD / Raw DAO at the slowest speed your burner supports.

    found this tutorial and I do not understand very well help me?

    ResponderEliminar
  26. I don't understand it very well too.

    For toasting a stand-alone NEO4ALL/CD with a game included, you must edit config.cfg and toast all game with CDDA tracks.

    I can do it at past using cdrecord in linux and I don't remember how.

    Try to ask on dreamcast scene forums like dcemulation or dreamcast-scene.

    ResponderEliminar
  27. chui respuesta please habra algun rom de metal slug 3 para sega dreamcast

    ResponderEliminar
    Respuestas
    1. I think that metal slug 3 must work, I see this line at romrc file from convertneo tool:
      game mslug3n MVS_CMC42 "Metal Slug 3 (Encrypted GFX)"

      Eliminar
  28. chuy yo soy muy tonto para eso de poner los juegos en el disco y despues grabarlo podrias subir un link con la iso ya hecha con varios juegos porfavor yo se que es demasiado con que hayas creado el emulador pero yo no le se a esto

    ResponderEliminar